Shenzhen AMEISON Communication Equipment Co.,Ltd.
Intentions to innovation, Competition can develop
Add to Cart
AMEISON manufacturer CDMA Outdoor Omnidirectional Fiberglass Antenna 10db high gain GSM omni antenna 824-960MHz
Feature :
Exquisite appearance
Good impact resistance,waterproofing and anticorrosion ability
Full day working
Optimized dimension
High gain,low standing wave,strong anti-interference ability
Application :
824-960MHz /CDMA/GSM system
Point-to-multipoint system
824-960MHz Omnidirectional Fiberglass Antenna
| AMXF-8090-10 Electrical Specifications | |
| Frequency range(MHz) | 824～960 |
| Bandwidth(MHz) | 136 |
| Gain(dBi) | 10 |
| Half-power beam width(°) | H:360 V:9 |
| VSWR | ≤1.5 |
| Input Impedance(Ω) | 50 |
| Polarization | Vertical |
| Maximum input power(W) | 100 |
| Lightning protection | DC Ground |
| Input connector type | N Female |
| Mechanical Specifications | |
| Dimensions (mm) | Φ20*1550 |
| Antenna weight(kg) | 0.65 |
| Operating temperature(°c) | -40～60 |
| Rated Wind Velocity(m/s) | 60 |
| Radome color | Gray |
| Mounting way | Pole-holding |
| Mounting hardware(mm) | ￠35-￠50 |
Install as the picture below
Installation Steps
1.Place the M6 U-shape screw through the holes on the clamps to mount the antenna to the pole whose outer diameter is ￠35～￠50mm.Then put on the flat washer,the spring washer and twist all the nuts.
2. There should be at least three meters between the ground or floor and the antenna above.No huge building or metal object or any other obstacle or shelter nearby.
3. Adjust the mounting height of the antenna to the proper position to receive the best signal,then seal all the connections.
4. Please pay attention to lightning protection.